I have a figaro chain that is stamped 14K with no other numbers on it. Is it gold-plated or solid gold?
We are going to hope that the 14k on your piece does actually mean that it is solid 14k gold. However, I am just a little suspicious only because there is no maker's mark accompanying your 14k stamp.
The lack of a hallmark (10k, 14k, 18k etc.) is not indicative of whether your piece is gold or not. In the United States it is against the FTC's regulations for the jeweler to hallmark a piece of jewelry unless it is accompanied by a maker's mark. So, when I first began making jewelry and did not have a trademark of my own, I did not hallmark my jewelry. Now that I have a maker's mark, I hallmark my jewelry with the appropriate metal hallmark and my maker's mark.
Do NOT hold a lighter to your gold. Having torch-soldered a lot of gold, I can tell you that the heat from fire WILL change your gold's appearance. If this happens, you'll have to go through a professional pickling, cleaning and polishing to bring the color back to what it was.
A jeweler cannot just look at a piece and tell you for certain whether it is gold or not; the jeweler will do a test to determine it.
To be scientfically accurate a sample of the metal in question must be assayed in a testing laboratory, but the following two tests have been used for many years and often are sufficiently accurate for a craftsperson or the owner of the metal in question.
To answer "Is It Gold?":
With a small file, make a scratch in an inconspicuous spot. While wearing rubber gloves, use a wooden, glass or plastic stick to apply a drop of nitric acid to the filed spot. Observe the reaction. When done, rinse everything well in running water.
If there is no reaction, it's gold.
If there's a bright green reaction, it's base metal.
If there's green in the scratch, it's a gold layer over base metal (goldplate).
If there's a milky reaction in the scratch, it's a gold layer over silver.
To answer "What Karat Is It?"
Determining karat requires a testing kit containing nitric acid, aqua regia, samples of known karat, and a touchstone of slate or ceramic.
The gold object to be tested is rubbed on the stone ("touched") to leave a streak. A parallel line is made with one of the test pieces of known karat. Both marks are flooded with acid and the reaction are observed. When the sample colors at the same rate as the test streak, a match has been made. Nitric acid is used for low karat golds; aqua regia is needed for higher karats.
Please note: these tests are for your information only. They are not accurate enough to rely upon when representing a piece for sale. Most jewelers have testing kits to use when determining if something is gold or not and its approximate karat. It is probably easiest to take the item to a jeweler than to set up the testing kits yourself
24ct Gold Brush Plating made easy. www.goldplate.dk
